Home

SE-210 / TL / Tragbar Leicht
Batteriekasten Spez 992 Bs
Telefunken AG, Zürich

Telefunken Logo
Swiss Army Communication Sets
 
Survey
Synoptic Table
 
Army Transceivers
 
Transceivers SE-1xx
Transceivers SE-2xx
Transceivers SE-3xx
Transceivers SE-4xx
 
SE-200 / LUX
SE-201 / REX
SE-206
SE-207
SE-208
SE-209
SE-210 / TL
 
Transceiver Ase211
Battery Set Spez 992Bs
Mains power supply NG TL
 
SE-211 / TLA
SE-213 / TLD
SE-222
SE-226
SE-227
 
links
varia / copyright
about / contact

überarbeitet am 8.9.2010

The Battery Case provides all necessary voltages used for the operation of the Wireless set TL.

 
 

In the top shelf, You find the accessories used for operation of the set, the microphone with the transmit/receive switch, the morse kex and some headphones. In a little drawer, the necessary replacement tubes and voltage regulators are stored, some of them still in the original wrapping paper.

The core part of this component is the automatic power supply switch. The so called "Machine cable" from the pedal-operated generator or the mains power supply will provide the input voltages: Filaments -H (- 8,5V), plate +A (+ 330V), grid Gv (- 65V). The set will convert the voltages to the necessary operating voltages: Filaments Hs (Transmitter, - 8,5 V), He (Receiver, - 6,5 V), grid Gv (65 V), plate voltages As (Transmitter, + 330 V) and Ae (Receiver, + 180 V), a six lead cable will conduct the voltages to the transceiver case.

Using a 6V Fe- Ni - accumulator and three 60V plate voltage batteries, the set can be used for reception only.
In the "BETRIEB" (Operation) position of the charging switch, the set can be used for reception and transmission while the pedal-generator is operated or the mains power supply is connected. The accumulators are charged slowly using a 1 Amp charging current. In the "LADEN" (Charging) position, the accumulators are charged much faster using 3,5 Amps charging current, bus the set can be used in reception mode only.
The set switches automatically from battery to pedal-generator power when a sufficient pedaling speed of the generator is reached.

Caution: Never operate the set using the Mains power supply without having a matching 6V accumulator installed, high peak voltages can cause damage to the transceiver or the power supply unit.